Product Categories
(Total 12 Products for Peek Auto Parts Molding)
We have extensive expertise lies in mold making of PEEK Mould. The mold temperature requirement of PEEK mold is high, often ranging from 140℃ to 180℃. Injection molding necessitates an even higher temperature span, typically between 320℃ and 390℃, owing to PEEK material's commendable ability to withstand elevated...
High Performance PEEK Material Parts Mould
This is our high-performance parts mold. The plastic used is PEEK. The raw material of PEEK plastic is an aromatic crystalline thermoplastic polymer material with a melting point of 334°C. It has high mechanical strength, high temperature resistance, impact resistance, flame retardancy, acid and alkali resistance,...
Professional Custom PEEK Injection Mold
Hongke Mould specializes high quality PEEK
mold making and injection moiding.By choosing Hongke Mold for your PEEK mould
needs, you’re partnering with a dedicated team that assures flawless execution,
timely delivery, and adherence to your budget. Equipped with state-of-the-art
technology and extensive PEEK injection...
We have extensive expertise in mold making for PEEK Mould. Due to the good heat resistance of PEEK material, the temperature span during injection molding usually needs to be between 320°C and 390°C. The temperature requirements of PEEK molds are also relatively high, often between 140 °C and 180 °C. The mold steel we...
PEEK Suture Anchor Medical Repair Parts Injection Mold
PEEK suture anchor belongs to the mold making case of our Medical Repair Parts Mold category. This product is mainly used for repair and fixation of joints in surgical operations. Mold Insert Steel is S136, hardness HRC48-52, mold life can reach 500,000 shots and gate way is hot runner system Hot Tip Gate. We use PEEK...
High Performance Material Injection PEI Precision Mould
This is a high performance material parts injection PEI precision mould designed and produced by our company. We have rich experiences at making PEI Mould, PSU Mould, PPSU Mould and PEEK Mould. Please contact us, we will provide you with similar cases. PEI (Polyetherimide) is a high-performance engineering...
Custom High-performance Materials PEI Injection Mould
This is a PEI precision mold designed and produced by our company. We used high-quality mold insert steel H13, the hardness can reach to HRC48-52, and the mold life can reach 500,000-1,000,000 shots when the mold is properly maintained. PEI has inherent flame-resistant properties, meeting various flammability...
PEEK Thermoplastic Material Molding
We have rich experience in mold making for PEEK Mould. As we know that PEEK material has good performance of high temperature resistance, which can reached 140℃ to 180℃ when mold making and also can reach to 320~390℃ during products injection molding producing. We used H13 steel with hardness of HRC48-52 in this mold....
High-Performance Parts PEI Plastic Mould
This is a high-performance parts PEI plastic mould designed and produced by our company. PEI maintains its properties in harsh conditions, including exposure to radiation, extreme temperatures, and aggressive chemicals. PEI's exceptional creep resistance allows it to withstand prolonged stress without permanent...
PEEK Interface Screw Plastic Injection Mould
Hongke Mould is an experienced factory certificated by ISO9001:2015/ISO13485:2016/ISO14001:2015, we are focusing on developing, design, manufacturing plastic injection mold making and injection molding for medical repair parts mould. Making Capabilities: --Injection mould design for PEEK interface screw.
--Mould...
Ultra-high Quality Medical PEEK Suture Anchors Mould
Introducing our ultra-high-quality Medical Repair Parts Mould - PEEK Suture Anchor, which is widely used for fixation in arthroscopic repair, especially rotator cuff (shoulder) and hip labrum repair. We are very good at medical PEEK Precision Mould and injection molding production. The injection molding machine can...
PEEK Suture Anchor Plastic Injection Mold
Hongke
customized PEEK suture anchor mold making and injection molding .PEEK anchor
with wire is made of PEEK material, suitable for soft tissue injury repair of
shoulder joint, ankle joint, knee joint, hip joint, wrist joint and other
joints. PEEK material is a new type of implant grade material, its
scientific name...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.